Material – Poly Propylene-UV Color with identifiable DANGER label.KRM LOTO Ball  Valve Lockout’s body is in two parts, The butterfly valve lockout is a simple, effective way to secure your butterfly valves to prevent unauthorized operation working with low and High temperature variation – 45°C to 200°CModel – Standard Small  with six holes for Locking on both parts will match for Group lockingSize Applicable – Suitable for 2” to 8” (50.8 mm to 203.20 mm)  diameter of Ball ValveOuter edge to edge Length – 295 mm (11.61”)Color – Standard color Red Or any color make as per the required quantity Weight – 550 gm

Material – Poly Propylene with pasted label of identificationKRM  LOTO Gate Valve Lockout is made by two parts these rotational valve covers can withstand in extreme weather conditions, resistant to cracking and abrasion that is valid for temperature range up to – 46°C to 177°C.  Model – with single and double hole options for lockoutSurrounds the valve hand-wheel to prevent from being turned and protect against accidental operations.Size Applicable – Suitable for I.   KRM-K-GVL- 02 for 25 mm to 64 mm (1” – 2.5”) diameter valves II.  KRM-K-GVL- 04 for 63 mm to 130 mm diameter III. KRM-K-GVL- 06 for 25 mm to 190 mm diameterIV. KRM-K-GVL- 08 for 165 mm to 280 mmV.   KRM-K-GVL- 10  for 280 mm to 381 mmColor – Standard color Red Or any color make as per required quantityWeight – 58 gm, 190 gm, 297 gm, 650 gm and 1250 gm for KRM-K-GVL- 02/04/06/08/10 Respectively.

• Material – Poly Propylene with pasted label of danger or caution.
• KRM  LOTO Gate Valve Lockout’s body is in two parts that is made of high quality insulation  resin, that is resistant to cracking and abrasion used to avoid accidents and not effected by chemical, valid up to temperature range – 46°C to 177°C.
• Its specialty is that its very flexible lockout arrangement that fits on gate valve of different dimensions, also very compact and easy carrying.
• Model – with five holes for Group Isolation, that can be locked by using padlock.
• Size Applicable – Suitable for 25 mm to 190 mm  diameter Valves
• Color – Standard color Red Or any color make as per quantity required

Material – Poly Propylene with pasted label of identificationKRM  LOTO Gate Valve Lockout is made by two parts these rotational valve covers can withstand in extreme weather conditions, resistant to cracking and abrasion that is valid for temperature range up to – 46°C to 177°C.  Model – with single and double hole options for lockoutSurrounds the valve hand-wheel to prevent from being turned and protect against accidental operations.Size Applicable – Suitable for      I.   KRM-K-GVL- 02 for 25 mm to 64 mm (1” – 2.5”) diameter valves    II.      KRM-K-GVL- 04 for 63 mm to 130 mm diameter   III. KRM-K-GVL- 06 for 25 mm to 190 mm diameter  IV. KRM-K-GVL- 08 for 165 mm to 280 mm  V.   KRM-K-GVL- 10  for 280 mm to 381 mmColor – Standard color Red Or any color make as per required quantityWeight – 58 gm, 190 gm, 297 gm, 650 gm and 1250 gm for KRM-K-GVL- 02/04/06/08/10 Respectively.

The Gate valve is a locking arrangement that is used to lock spindle and wheel of the gate valve when it’s closed and then locked by an authorized person to prevent injuries to the repairmen working at industrial areas, also it’s cheap in cost and safe to secure human error, different five sizes are available

•Material – Poly Propylene with pasted label of identification
•KRM LOTOGate Valve Lockout is made by two parts these rotational valve covers can withstand in extreme weather conditions, resistant to cracking and abrasion that is valid for temperature range up to – 46°C to 177°C.

The Gate valve is a locking arrangement that is used to lock spindle and wheel of the gate valve when it’s closed and then locked by an authorized person to prevent injuries to the repairmen working at industrial areas, also it’s cheap in cost and safe to secure human error, different five sizes are available

•Material – Poly Propylene with pasted label of danger or caution
•KRM LOTO Gate Valve Lockout’s body is in two parts that is made of high quality insulation resin, that is resistant to cracking and abrasion used to avoid accidents and not effected by chemical, valid up to temperature range – 46°C to 177°C. 
•Its specialty is that its very flexible lockout arrangement that fits on gate valve of different dimensions, also very compact and easy carrying.
•Model – with five holes for Group Isolation, that can be locked by using padlock.
•Size Applicable – Suitable for 25 mm to 190 mm diameter Valves
•Color – Standard color Red Or any color make as per quantity required
•Weight – 270m gm

Material – Poly Propylene – UV Color with identifiable DANGER or CAUTION label.KRM LOTO Ball  Valve Lockout’s body is in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that is resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalog, Resistant to low and High temperature variation – 45°C to 200°C.It is virtually indestructible finger friendly valve covers  whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve handle from being turned.Model – Standard Small  with seven or six holes for Locking on both parts will match for Group locking.Size Applicable – Suitable forI)   KRM-K-BV-01-ST and KRM-K-BV-01-ST ST-EX  for 9.5 mm to 31.5 mm(3/8“ to 1 1/4") diameterII)   KRM-K-BV-01-LL/BV-01-LL-EX/BV-01-DL/BV-01-DL-EX/BV-01-DL-LL for 2-1/2“(63.5 mm)    diameterIII)   KRM-K-BV-01-DL-LL- EX for 1½" - 2½“  diameterIV)   KRM-K-BV-02 L for 2”- 8" for (50.8 MM TO  203.20 mm ) diameterColor – Standard color Red Or any color make as per the required quantity Weight – 170 gm to 563 gm, different weights for different ball valve lockout.

Material – Poly Propylene – UV Color with identifiable DANGER or CAUTION label.KRM LOTO Ball  Valve Lockout’s body is in two parts, these are simple, easy to use lockouts that clamp over the valve lever, that is resistant to cracking and abrasion preventing the valve from operating, and lock in place by using catalog, Resistant to low and High temperature variation – 45°C to 200°C.It is virtually indestructible finger friendly valve covers  whose inner side can be used for gripping the valve handle sleeves inside the cover, after locking they prevent valve handle from being turned.Model – Standard Small  with seven or six holes for Locking on both parts will match for Group locking.Size Applicable – Suitable forI)   KRM-K-BV-01-ST and KRM-K-BV-01-ST ST-EX  for 9.5 mm to 31.5 mm (3/8“ to 1 1/4" ) diameterII)   KRM-K-BV-01-LL/BV-01-LL-EX/BV-01-DL/BV-01-DL-EX/BV-01-DL-LL for 2-1/2“(63.5 mm)   diameterIII)   KRM-K-BV-01-DL-LL- EX for 1½" - 2½“  diameterIV)   KRM-K-BV-02 L for 2”- 8" for (50.8 MM TO  203.20 mm ) diameterColor – Standard color Red Or any color make as per the required quantity Weight – 170 gm to 563 gm, different weights for different ball valve lockout.

Material – ABS/PP, Mild stainless steel part, SS sheet and Spring, PUKRM Universal Valve Lockout is very flexible and versatile lockout device to use and make your investment economical, light weighted for extra impact and chemical resistant.It can be used to lockout large levers, T-handles and other and other mechanical devices with cable and arm attachment in ON, OFF or SET positions.Available with the provision of with or without cable.Lower Bottom Jaw Grip diameter – will fix at handle Or lever of 15 mm Or 25 mm thicknessInsulated steel Cable – length 2.5 meter, thickness 5 mm Or avail as per the requirement Locking – Four holes for Group IsolationTotal Length – 120 mmColor – Standard color Red Or any color make as per the required quantity Weight – 170 gm of device

Material – ABS/PP, Mild stainless steel part, SS sheet and Spring, KRM Universal Valve Lockout with single / double arm used to lock the clamp attaches to ballvale/butterfly handles, preventing trigger handle from being squeezed Lower Bottom Jaw Grip – both can be fixed on handle and lever of 15 mm and 25 mmBlocking Short arm size for KRM-K-ULD-WSA-1-15 /2-15 – length of steel rod 160 mm, thickness 9 mm, horizontal length 155 mmLocking – Four holes for Group IsolationTotal Length – 120 mmColor – Standard color Red Or any color make as per the required quantity Weight – 361 gm for KRM-K-ULD-WSA-1-15 and 560 gm for KRM-K-ULD-WSA-2-15